How do I turn off the child lock on my LG dishwasher?
Press and hold Dual Zone for 3 seconds to activate or deactivate this function. The control lock indicator will illuminate on the control panel if the feature is activated. Note: You must deactivate the control lock feature to select new settings. The Control Lock feature does not lock the door.
What is CL on LG dishwasher?
CL – Child Lock
This code means that the CHILD LOCK or CONTROL LOCK feature has been activated. When activated, all buttons will not change except the washer’s door and the POWER button. To activate the child lock: Open the dishwasher door.
How do I turn off LG child lock?
To TURN OFF CHILD LOCK on your LG washer, press and hold the CHILD LOCK button for 3 to 5 seconds. The washer should now have CHILD LOCK mode DISABLED and all buttons will function properly. NOTE: ON other newer LG front load washing machines hold the PREWASH/CHILD LOCK button for 3 to 5 seconds to turn CHILD LOCK OFF.
How do you reset a LG dishwasher?
This can usually be corrected by performing the following steps:
- Press the POWER button to turn the dishwasher off.
- Turn the circuit breaker to the dishwasher OFF and wait 10 seconds.
- Turn the circuit breaker to the dishwasher back ON.
- Press the POWER button to turn the dishwasher ON, and start a new cycle.
3 июл. 2019 г.
How do I reset my dishwasher control panel?
How Do I Reset My Dishwasher Control Panel? Simply unplug your dishwasher. Wait for one minute, then plug it back in again, to reset the dishwasher control panel.
How do you turn off the child lock on a Haier dishwasher?
indicator will flash for a few seconds.
- 1.To activate Child lock, press and hold that Child lock has been. activated.
- 2.The display will remain on (if no programme has been started it will. continue to flash while the control panel is locked).
- 3.To cancel Child lock, press and hold that Child lock has been. cancelled.
Why is my LG dishwasher countdown 4?
Counting 4,3,2,1 appears in display
The door is sensing a problem with the latch system. Normally it is related to improper installation.
How do I reset the code on my LG dishwasher?
-Turn off the LG Dishwasher for 30 to 45 minutes to let the motor cool down as it may have overheated. -After 30 to 45 minutes start a new wash cycle and check if the LE error code shows again. -If not, resume normal washing.
How do I fix the code on my LG dishwasher?
Once the water is soaked up or enough time has passed for the water to evaporate, turn off the circuit breaker and turn it back on to reset the dishwasher. Then run an empty cycle with nothing in it to clean out the dishwasher. If the error code occurs again, service will be required.
How do I turn off the child lock on my Samsung washer?
To deactivate the lock, push and hold the “Spin” and “Soil Level” buttons for six seconds. The “Child Lock” light will go out. To reactive the child lock, press and hold the “Signal” and “Soil Level” buttons for three seconds.
How do you reset a dishwasher?
Try pressing the “Start/Reset” pad to reset the dishwasher and wait 2 minutes. If the problem persists, reset (reboot) the dishwasher by turning off power to the unit at the house circuit breaker/fuse box for 30 seconds. Restore power and the dishwasher should function normally.